FingerTec Kadex Manual - Manual (Page 19)

19 CONTENTS
View MAC: This feature is a security feature of the products. Linking Software to the
terminal requires the correct MAC address. Without availability of MAC address, the
software will not be activated correctly. All products are supplied with the correct MAC
address to ease communication. This is also to hinder people from using the software
with a different hardware brand. An example of a MAC address is 00:0A:5D F1 BE 57.
Menu > Sys Info > Dev Info > View MAC
MCU Version: An MCU is the Main Controller Unit for the terminals. Version of the MCU
determines the features and functions the terminal carries. To check the MCU Version:
Menu > Sys Info > Dev Info > MCU Version
Log Information (Log Opt)
A terminal can only retain certain amount of information before the terminal becomes
full and stops accepting anymore data . To maintain the performance of a terminal, you
can set an alarm to alert you when the data reaches a certain warning level.
ALARM SUPERLOG
To instruct terminal to alert user if the transaction storage for administrator login is less
than as configured. Default value is 99.
ALARM ATTLOG
To instruct terminal to alert user if the transaction storage is less than as configured.
Default value is 99
RECHECK MIN
To instruct terminal to update clocking times of all users in a time interval. Default is 10
mins.