FingerTec AdapTec Plus (New Model) - Manual (Page 11)

12
Glass Door
1
Lodge the
U-Bracket into the upper edge of the glass doorframe. Tighten
the 4 Allen Key Screws to hold the U-Bracket into position.
2
Place the
Steel Bar on the side of the U-Bracket . Tighten the Philip Screws to
lock the Steel Bar onto position.
U-Bracket
Philip Screw
Steel
Bar
Allen Key
Screws
Allen Key
Screws
Glass Doorframe
1
1
2
1
Drill 4 holes on the wooden frame. Tighten the 4 screws to fix the
Alumi-
num Plate properly on the doorframe.
2
Use the Allen Key to tighten the 2 screws at the bottom of the
Magnet .
The Magnet will stick to the Aluminum Plate when the screws are tight-
ened.
3
Use the Allen Key to tighten the other 2 screws on the sides of the
Mag-
net.
Screws
Magnet
Doorframe
Aluminum Plate
Allen Key
Screws
1
1
2
3