FingerTec AdapTec Plus (New Model) - Manual (Page 8)

9
AdapTec Plus
Connection
Points
GND
12V
Siren Mute
Button
Tamper Siren EM +12V Siren Exit Data
Switch Out Lock Out
OV
Mute Switch
OV
D1 D0
ALM +
ALM ----
Alarm
Siren
+ ---
Remark:
•
Set Auto Alarm in terminal to N.
•
Menu > Options > Sys Opt > Adv Opt >
Auto Alarm > N.
WIRING DIAGRAMS
3
ALARM SIREN • R2, Kadex, m-Kadex, H2i and Face ID3
CONNECTING ADAPTEC PLUS TO AN ALARM SIREN
For all FingerTec door access control models, there is
a security button behind the terminal. During normal
operation, the security button is compressed and once
the terminal is dismantled, the button will be released
and a
“System broken” message will appear onscreen.
During the release of the button, the terminal will output an alarm signal.
However, no alarm sound will be emitted if the terminal is not equipped
with an external siren.
To use the siren feature, we recommend that you install an additional
alarm siren and connect it to the FingerTec terminals.
Benefi ts of Using AdapTec Plus with Alarm Siren
We recommend that you install a terminal along with AdapTec Plus if you
plan to use the alarm siren. In AdapTec Plus, an additional port is read-
ily built to receive the alarm signal from the FingerTec terminals. AdapTec
Plus has an output of 12VDC and it is suitable for use with an alarm siren
that has the same power input. You do not need to source an additional
12VDC power supply for this purpose. Furthermore, AdapTec Plus comes
with a
“Siren Mute” button where you can press the button to deactivate
the alarm siren when required.