Flintec FT-15D - Manual (Page 11)

FT-15(D) Technical Manual, Rev. 1.02 August 2010 Page 11 of 52
5 F RONT P ANEL AND K EYPAD
5.1 Weight Display and Status LEDs
FT-15 FT-15
Figure 5.1 Front panel view of FT-15(D)
The weight display of FT-15(D) is a 6 digit LED with 20 mm height. At the right side of the display there are
three status LEDs for indicating “Gross”, “Info” and the standard unit “kg”.
Below and left to the weight display there are 12 status LEDs related to the weighing process.
The meanings of the various LEDs are:
Status LEDs
LED Meaning
Ready Indicates the instrument is ready for a new weighing cycle
1 Indicates the first weighing process
2 Indicates the second weighing process
PTVehic Indicates the instrument is in the preset vehicle weighing process
TRANSIT Indicates the transit weighing process
Key lock: is active
Power: This LED will flash in case of supply voltage decrease. If the voltage decreases too much the
indicator will automatically shut off.
Range: With multi range scales these LED indicates the current operating range. For single range
scales only the first range LED is lit.
Preset tare: Indicator works with a preset tare
Stable: The weight value on the display is stable
Center of zero: The weight is in the center of zero (see param. [203] in chap.6.3)
Info: The instrument displays information different from the weight