Flintec FT-15D - Manual (Page 23)

FT-15(D) Technical Manual, Rev. 1.02 August 2010 Page 23 of 52
8 M EMORY O PERATIONS
8.1 Temporary First Weighing Memory
Up to 99 first weighing records are saved in the temporary first weighing memory for later use with second
weighing records. After the second weighing operation of any inbounded vehicle, the related first weighing
record will be deleted from the Temporary First Weighing Memory.
The first weighing record will be stored to the temporary memory with its code which will be automatically
created by the instrument. This code will be printed on the first weighing ticket for later use with the second
weighing record. It is not possible to manipulate any data in this memory or to manually enter new data into this
memory. The only possibility is to delete a weighing record which will not be needed anymore by using.
Therefore you have to use its code.
To access any first weighing record, press the <F> and the <First Weighing> keys in sequence. Then the
message [ teMp ?] appears on the display. Press the <Enter> key to enter the menu.
Then the message [Cod --] and the corresponding first weight value toggles on the display. You can go to any
record by using the <
>
and < >
keys.
To delete any weighing record from the temporary first weighing memory, press the <First Weighing> key while
its code is displayed as [Cod XX]. The message [dEL XX] appears on the display. When you press the <Enter>
key the weighing record will be deleted. If you want to delete all weighing records, press the <Zero> key instead
of the <Enter> key. The message [ ALL ?] appears. If you press the <Enter> key, the message [ SUrE ?]
appears and all temporary first weighing records will be deleted after pressing the <Enter> key. The record
delete cycle can be aborted by pressing the <F> key.
If you press the <Second Weighing> key when the message [Cod XX] and the corresponding first weight
toggles on the display, a temporary first weighing memory report will be printed.
8.2 ID Memory
FT-15(D) has two ID codes and the capability to assign clear-text names to them for print out. There are also 99
ID memories which can be shared between the two IDs in any way. The IDs can either be entered via related
keys or can be downloaded via serial port in host mode (e.g. by using the FLINTEC IndFace software).
To call any ID from the memory you have to press the <M> key at the entry step of a weighing process. then the
[ıd --] is prompted. Enter the ID code (from 1 to 99) and confirm with the <Enter> key. If you want to return to
the manual ID entry status, you can simply press the <F> key while the [ıd --] is prompted.
If you have downloaded ID headers to FT-15 by using the IndFace software, the new ID headers can be printed
instead of the default ID headers which are “Customer” for ID 1 and “Commodity” for ID 2.
8.3 Preset Vehicle Weight Memory
99 numerical vehicle weight values can be stored within FT-15(D) and can be recalled as a preset tare to
compute the net weight.
To store a numerical vehicle weight value into the memory you have to press the <M> key in the instrument
ready status. Afterwards the message [MeMorY] is shown on the display and you have to press the <PV> key.
Then the message [PtN x] will appear on the display which means that you have reached the first PT record in
the preset vehicle weight memory. You can directly enter the code number of the desired vehicle weight or you
can search for the vehicle weight code by <
>
and < >
keys.
After finding the desired vehicle record number you can access it by pressing the <Enter> key. The vehicle
weight value is now shown on the display. Enter the the new preset vehicle weight value with numerical keys,
then confirm with the <Enter> key. Now the indicator steps to the next vehicle record. Pressing the <F> key will
be enough to return to the weighing mode.
For selecting a preset vehicle weight code (any preset tare value) from the memory within a preset vehicle
weighing process you have to press the <M> key first. Now the message [P.no ] code is prompted on the
display. You should type the related preset weight code (from 1 to 99) with numerical keys and confirm it with
the <Enter> key. The chosen preset vehicle weight value (any preset tare value) will be shown on the display for
a while, then the indicator goes to the next step.
If a selected preset tare code is empty, the [EMPtY] message will appear on the display. If the tare weight value
is smaller than zero or greater than the scale capacity, the [Err Pt] message appears on the display. The
message can be confirmed by pressing the <Enter> key and a new value can be entered.