Flintec FT-15D - Manual (Page 12)

FT-15(D) Technical Manual, Rev. 1.02 August 2010 Page 12 of 52
5.2 Keypad
The meaning of the front panel keys and the key functions are:
FT-15(D) Meaning
Power On/Off: This key is used for turning the instrument on or off. To switch off the key must be
pressed and hold at least for 2 seconds. There is no On/Off key on panel type housings.
Function: This key is used in combination with other keys to enter any function or to quit without saving.
Reset: Reset any weighing process
Info: This key is used to view the last printed ticket no. CN, the vehicle quantity in the temporary first
weighing memory [Temp ] as well as Date and Time information. To toggle between these infos you have
to press this key repeatedly and finally you will return to the weighing mode again.
Manual Zero: If the scale doesn’t show zero while there is no load on the scale, you can zero the scale
by pressing this key.
Key Lock Key:
You can activate or deactivate the key lock function by pressing the <F> and <Key Lock>
keys sequentially.
Transit: Pressing this key starts the transit weighing cycle.
Preset Vehicle Weighing: Pressing this key starts the weighing cycle with a preset vehicle weight value.
First weighing: Pressing this key starts the first vehicle weighing cycle.
Second weighing: Pressing this key starts the second vehicle weighing cycle.
Enter: This key is used to go to the next step within a weighing cycle. It is also used for confirming an
entered value and to get to the next parameter in setup mode.
ID: Used for numerical ID entry.
Numerical Keys: These keys are used for entering numerical values.
Memory: This key is used to enter data to the preset vehicle weight memory or the ID memory or to store
a vehicle weight to the memory.
High Resolution: By pressing this key the weight value will be shown with a higher resolution for a short
period.
Label No: After pressing this key, first [CN ] message appears on the display then you can see the CN
no. By pressing the <F> key or after a while automatically it returns to weighing mode
Reprint: This key is used for reprinting the last weight ticket if the indicator is in the instrument ready
status.
Report Daily: This key is used for a daily report.
Report DD: This key is used for a report between two dates
Report CN: This key is used for a report between two ticket numbers.
Report Accu PV: This key is used for accumulator report of the vehicles in the preset vehicle
weight memory.
5.3 Key lock (for FT-15 only)
The instrument has the capability to lock the keys to avoid unauthorized person’s interference. You can activate
or deactivate this function by pressing the <F> and <Key Lock> keys sequentially. The LED with the key sign
(below the display) indicates the keys are locked.