Flintec FT-15D - Manual (Page 22)

FT-15(D) Technical Manual, Rev. 1.02 August 2010 Page 22 of 52
7.5 Accumulated Report for Preset Vehicle Weights
You can print an accumulated weighing data by the
<Report Σ PV> key.
After pressing the <Report Accu PV> key in the
instrument ready status, the [Accu] message
appears. The report starts after pressing the <Enter>
key. The report includes the first CN, the last CN and
the totals.
The [DEL N] message appears after the report.
Press the <Enter> key to exit without clearing the
accumulator.
To clear the accumulator, press the preset vehicle
weight key, change the message to [DEL Y] and
press the <Enter> key. The [SURE] message will be
displayed. Then press the <Enter> key and
accumulator will be cleared.
Press the <Reset> key to cancel the report.
The accumulator report will be created as shown
below.
REPORT PVehicle Accumulator
CN Start: 234 Date: 01.01.2009
CN End: 456 Date: 14.01.2009
PV Code Weighing Qtity Total kg
----------------------------------------------------------
01 09 94680
03 248 425430
88 3 38540
-----------------------------------------------------------------
TOTAL 260 558650
7.6 Reprint the Weighing Ticket
You can reprint the last weighing ticket in the
instrument ready status. This feature gives the
operator a benefit in case of lost tickets or for any
reason non-printed tickets.
After pressing the <CN> key, press the <Enter> key
in the instrument ready status to reprint the last
weighing ticket. If you enter a new CN before you
press the <Enter> key, the related weighing ticket
will be printed.
Press the <F> key to return to the instrument ready
status or wait for a while.
Instrument Ready Status
[ XXXXXX ]
Ticket number
[ Print ]
Report Message
Instrument Ready Status
[ Accu? ]
Message to start report
[ Print ]
Report Message
[ DEL N ]
Message to start clearing accumulator
[ DEL Y ]
Message to validate
clearing accumulator
[ SUrE ? ]
Accumulator is
not cleared.
Accumulator is
cleared.