GTCO AccuTab II - Users Guide - Manual (Page 10)

AccuTab II 10
Clicking and Double-Clicking
Clicking is the action of making a selection. You may be selecting a key on the tablet
surface or making a selection from the monitor screen. To click, place the transducer or
move the screen pointer via the transducer to the item to be selected and then tap the pen
or press Button 0 on the cursor. A double-click requires you to press the button quickly
two times while the transducer remains in the same place. You can also double click by
pressing the cursor button that has been defined as a double-click button (see TabletWorks
Help).
Dragging
Dragging is the action of moving the transducer during a selection. To drag, click on an
object, but instead of releasing the tip or button, hold it down while moving the pointing
tool or corresponding object on the screen, to the desired new location.
Using the AccuSet Menu
Use the AccuSet Menu to:
 Configure AccuTab II for specific application programs
 Use the Tablet Configuration Utilities
 Control the alarm
 Reset the AccuTab II
 Test the active area
Configuring for Specific Application Programs
You can use the AccuSet Menu to quickly change the AccuTab II’s operating characteristics
to match those required by different application programs running on the computer.
To configure AccuTab II for use with specific application programs:
1. In Table 1, find the application program you’ll be using with AccuTab II. Please note
the corresponding AccuSet Code.