GTCO AccuTab II - Users Guide - Manual (Page 48)

AccuTab II 48
Table 4: GTCO/CalComp High Resolution Binary Format
To set up the GTCO/CalComp Binary Format:
Custom Configuration Menu:
1. Select GTCO Binary or CalComp Binary (under Output Format Options).
2. Choose the desired resolution (under Mode Options).
GTCO Commands:
1. Send command BI for Binary format.
2. Send command IN for English or command MT for metric measurements.
3. Send command HR for 1000 lpi/40 lpmm, command H1 for 2000 lpi/100 lpmm or
command H1 for 4000 lpi/150 lpmm resolution.