GTCO AccuTab II - Users Guide - Manual (Page 49)

AccuTab II 49
Summagraphics Binary Format
This eight-byte format is compatible with the Summagraphics 2000 lpi UIOF format. Table
5 shows the structure of this format at the bit level.
NOTE: This format will not support 4000 lpi on 36” x 48” or larger tablets.
To set up the Summagraphics Binary Format:
Custom Configuration Menu:
1. Select Summa Binary (under Output Format Options).
2. Choose the desired resolution (under Mode Options).
Table 5: Summagraphics Binary Format