GTCO AccuTab II - Users Guide - Manual (Page 14)

AccuTab II 14
Using the Custom Configuration Menu
The AccuTab II with its Controller uses the Tablet Configuration Utilities to control baud
rate, data format and other operating characteristics.
If your application does not have an AccuSet Menu Code or if a different configuration is
required, then use the Custom Configuration Menu to format AccuTab II. The Custom
Configuration Menu replaces the 24 switches associated with the older Type 5A Controller.
It also replaces the Custom Configuration Menu Card used with AccuTab.
Configurations you set up can be stored in any of ten user-definable AccuSet locations
(codes 90 through 99) for recall at a later time. This allows the AccuTab II to be easily
switched between applications.
To configure AccuTab II with the Custom Configuration Menu:
Please read the Release Notes on the CD for the location of the Custom Configuration
Program.