GTCO AccuTab II - Users Guide User Manual
Page 18
AccuTab II 18
Testing the Active Area
To test the active area of the AccuTab II:
Select the
(Prox Test) block on the AccuSet Menu. AccuTab will produce a continuous
tone as long as the transducer is in proximity to the tablet. When proximity is not detected,
the tone will stop.
AccuTab II Tones
AccuTab II produces an alarm in the form of audio tones to inform you of various events.
The table below describes the kinds of tones you may hear while operating the digitizer.
Troubleshooting Guide
GTCO CalComp by Turning Technologies wants your experience with AccuTab II to be a
successful one. If you ever encounter a problem, please follow the steps below:
1. Install properly first.
This troubleshooting guide assumes you have already correctly installed AccuTab II
according to the detailed instructions in the Installing Your AccuTab II section. If you
have not followed the step-by-step instructions in that section, do so now.