Interlogix TVK-800 - Manual (Page 10)

8 TVK-800 User Manual
Figure 4: Description of the playback control dial and keys
Not used. Play the last five minutes in
decoder playback mode.
Play/pause.
Stop play back. Play back the previous file (not
available in USB playback mode).
Record. Play back the next file (not
available in USB playback mode).
Select options on the LCD display
There are four ways to select and enter items on the LDC display:
• Touch pen: Use the touch pen (see Figure 1 on page 5) to select options on
screen. Replace the touch pen in its holder when finished using it.
• Finger: Use your finger to select options on screen.
• Joystick: Rotate the joystick to position the on-screen cursor in the desired location.
Press the center key on the joystick to select.
• Mouse: Use a mouse. Plug the mouse into the USB socket on the back of the
keypad.
Joystick operation
Move the joystick in one of eight directions to control pan/tilt. Rotate the knob for zoom
control.
Press the center key on the joystick for the Enter function and to capture snapshots.
Save the snapshots to a USB flash drive or to a FTP site.
Using the key commands
Key operation
Table 1: Operating a multiple video display
Key Description Example
MON Num+MON: Select the video output to
be controlled by the decoder, NVR, or
DVR.
Note : When Num=0, the system enters
local live view mode.
Press the 2+MON keys to select monitor
2.