Interlogix TVK-800 - Manual (Page 69)

TVK-800 User Manual 67
4. Enter the preset number and press ENTER , enter the dwell time (called “Stop
Time on-screen) and press ENTER , and then enter the speed and press ENTER .
5. To set the next preset in the tour, repeat step 5.
Note: To clear all programmed parameters, press the Num + PATROL keys
again.
6. Press the SET key again to complete the preset tour.
Calling up a preset tour
There are two ways to call up a preset tour:
Method 1: To call up a preset tour using an output channel
1. Press the Num + MON keys to select the monitor.
2. Press the Num + WIN keys to select the video tile.
3. Press the Num + PATROL keys and enter the desired preprogrammed preset
tour.
Method 2: To call up a preset tour using an input channel
1. Press the Num + CAM keys to select the camera.
2. Press the Num + PATROL keys to enter the desired preprogrammed preset tour.