Interlogix TVK-800 - Manual (Page 34)

32 TVK-800 User Manual
3. Modify the device name. Click Modify to accept the changes.
Note: The user name and password refer to those required to log in to the device
from the keypad.
Delete a device
1. In the Main menu, click Device . The “Device-Device List” window appears.
2. Select the device to be deleted. Click .
3. Click Yes in the pop-up window to confirm the deletion.
Remotely control a DVR/NVR
You can remotely control a DVR or NVR through the keypad. There are two ways to
remotely control a device:
• Use the remote panel of the keypad.
• Use the MON key to connect directly to a DVR/NVR. This method may be easier to
use when there are several DVRs/NVRs connected to the keypad.
You can call up a specific output DVR or NVR by entering its output device number
and pressing the MON key. The output device number associated with a DVR or
NVR is shown in the “Output Settings-Output List” window (see “Output settings” on
page 38 for more information). A DVR or NVR can have a maximum of two monitors
connected to it. See Table 5 for an example on how to call up the desired monitor of
a DVR accessible by the keypad.
Table 5: Example of how to access a DVR monitor
Keypad keys to press DVR Monitor
#1 MON 1 A
#2 MON 1 B
#3 MON 2 A
#4 MON 2 B
Note: Not all DVRs/NVRs support remote control.
To remotely control a DVR/NVR using the keypad MON key:
1. Press the Num + MON keys to call up the monitor of the desired DVR or NVR.
The Shortcuts window appears.