Interlogix TVK-800 - Manual (Page 22)

20 TVK-800 User Manual
4. Select the desired cameras that you want to group together. Click Add to accept
the changes and return to the “Input Group” window. The list of successfully
added cameras to the group is shown.
Output list
The Administrator and Manager can modify the parameters of outputs such as
monitors, decoders, DVRs, and NVRs. Click
Output in the submenu panel to get the
Output window, which displays all the output channels that are accessible by the user
currently logged in. See Figure 12 below.
For further information on setting up output parameters, see “Output settings” on page
50.
Figure 12: Output window
Modify an output channel
1. In the “Output” window, select a camera from the list and click . The “Output
Settings-Modify Input” window appears.
2. Modify the output’s number. Click OK to accept.
Set up an output group
1. In the Input window, click the Group button. The “Input Settings-Input Group”
window appears.
2. Select the desired group number from the drop-down list.