Interlogix TVK-800 - Manual (Page 18)

16 TVK-800 User Manual
Device management
The Administrator can add, modify, or delete a device from the keypad. See Figure 9
below. The Manager and Operator/Custom users can only see the list of devices
available. For further information on setting up device parameters, see “Device
management” on page 29.
Figure 9: Device Management window
Add a device
1. Click Device Management in the submenu panel. The “Device Management”
window appears.
2. Click the Add button. In the pop-up window, add the device name, IP address,
port, as well as user name and password. Click OK to confirm.
The successfully added device is then listed in the Device Management window.
Modify a device
1. In the “Device Management” window, click for the selected device. In the
pop-up window, enter the new device name. Click OK to confirm.
Delete a device
1. In the “Device Management” window, click for the selected device. Click OK
to confirm the deletion of the user.
User management
The Administrator and Manager can use the browser to add, delete, and change the
user parameters. The Operator/Custom users can modify their passwords.
Note: Only the Administrator can create Managers. However, only Managers can
create Operator and Custom users
See Figure 10 on page 17. For further information on setting up user parameters, see
“User management” on page 35.