Interlogix TVK-800 - Manual (Page 27)

TVK-800 User Manual 25
2. Enter the port, IP address, subnet mask, default gateway values.
- Or -
Check the DHCP box. Ensure that you have a DHCP server on your network
before selecting this option.
3. Click Apply .
4. Click Return to return to the Main menu or click another Keypad menu option.
Hardware settings
1. In the Main menu, click Keypad > Hardware Settings . The “Keypad-Hardware
Settings” window appears:
2. Enter the desired value for each parameter:
Parameter Description
1. Key tone Key makes a beeping noise when pressed.
Enable or disable the option.
2. Audio warning Keypad emits warning if the network cable is disconnected.
Enable or disable the option.
3. Key light Keypad keys are lit red or blue to show if active or locked.
Enable or disable the option.
4. Lock the keypad Set a timer so that the keypad automatically locks itself after
a defined period of inactivity.
Select a time between 0 and 10 minutes of inactivity.
5. Turn off the screen Set a timer so that the keypad screen automatically turns off
after a defined period of inactivity.
Select a time between 0 and 10 minutes of inactivity.
6. Transparency Set the transparency level between the decoded video and
the menu. It only applies to local live view.
There are four values to select: 1:1, 3:1, 1:3, or Not
transparent.
7. Mouse speed Set the mouse speed.
Select a level between 0 and 2.
8. Brightness Set the screen brightness.
Select a level between 0 and 3.