Interlogix TVK-800 - Manual (Page 62)

60 TVK-800 User Manual
To set up a group tour:
1. Press the SET key to enter the group tour shortcut window.
2. Press the Num + GROUP keys and set up a group tour.
3. Press the Num + ENTER keys and set the monitor number.
4. Press the Num + ENTER keys and set the camera group (CAM-G) number.
5. Repeat steps 3 and 4 for each monitor and camera group to be included in the
group tour.
Caution: The tour parameters are cleared if you press the Num + GROUP keys
again.
6. Press the SET key to complete the group tour settings.
Call up a group tour
You can use a group tour to call up multiple camera groups on specific monitors. For
example, call up camera group 1 appears on monitor 1, and camera group 2 appears
on monitor 2. The dwell time of the group tour can also be modified.
If multiple camera groups have been set up to appear on the same monitor, then the
monitor only displays the last programmed camera group.
To call up a group tour:
1. Press the Num + GROUP keys to call up the programmed group tour.