Interlogix TVK-800 - Manual (Page 11)

TVK-800 User Manual 9
Key Description Example
MULT Num+MULT: Select the multiview
display format for the selected output
channel. Press the 2+MON+2+MULT keys to
configure a two-division display for
monitor 2.
WIN Num+MON+Num+WIN+Num+CAM-G:
Output and display the video signal
from the camera group on the selected
video tile of the monitor in cycle. Press the 2+MON+3+WIN keys to select
video tile 3 of monitor 2.
CAM Num+CAM: Select the video input. Press the 2+MON+3+WIN+5+CAM keys
to display video input 5 on video tile 3 of
monitor 2.
MON-G Num+MON-G: Select the monitor
group. Press the 1+MON-G keys to select
monitor group 1.
CAM-G Num+CAM-G: Select the camera
group. Press the 1+MON+1+CAM-G keys to
select camera group 1 to be displayed on
monitor 1.
SET SET+Num+TOUR/ GROUP/ PATROL/
PATTERN/ PRESET: Set the tour,
group, preset tour, shadow tour, or
preset. Press the SET+1+PATTERN keys to set
shadow tour 1.
TOUR SET+Num+TOUR: Set the tour.
Num+TOUR: Call the defined tour.
Press the SET+1+TOUR keys to set tour
1.
Press the 1+TOUR keys to call the pre-
defined tour 1.
GROUP SET+Num+GROUP: Set the group.
Num+GROUP: Call the defined group.
Press the SET+1+GROUP keys to set
group 1.
Press the 1+GROUP keys to call the
defined group 1.
PTZ control keys
Table 2: PTZ control keys
Key Description Example
PRESET Num+PRESET: Move the PTZ
camera to the desired position, and
then press the Num+PRESET keys to
set a preset. Press the 1+PRESET keys to set preset 1.
CALL Num+CALL: Call the predefined
preset. Press the 1+CALL keys to call preset 1.
PATROL SET+Num+PATROL: Set a preset
tour.
Num+PATROL: Call a predefined
preset tour.
Press the SET+1+PATROL keys to set
preset tour 1.
Press the 1+PATROL keys to call preset
tour 1.
PATTERN Num+PATTERN: Call a predefined
shadow tour. Press the SET+1+PATTERN keys to set
shadow tour 1.
Press the 1+PATTERN keys to call shadow
tour 1.