Interlogix TVK-800 - Manual (Page 59)

TVK-800 User Manual 57
To view a camera group on a monitor:
1. Press the Num + MON keys to select the monitor.
2. Press the Num + CAM-G keys to select the camera group to be decoded and
displayed on the monitor.
Note: If you enter 0 + MON in live view mode, multiview mode is not supported
as video is then displayed on the keypad.
Set up a camera group to display in the keypad window
The video signal from the camera group can be outputted to and displayed on the
selected window of the monitor in cycle.
Note: The default dwell time is 30 seconds.
An error message will appear in the Hint box of the shortcut screen when an invalid
action is entered.
To view a camera group on a monitor:
1. Press the Num + MON keys to select the monitor.
2. Press the Num + WIN keys, or directly touch the keypad window, to select the
display window.
3. Press the Num + CAM-G keys to select the camera group to be decoded and
displayed on the monitor.
For example, press 1+MON, 2+WIN, 3+CAM-G to decode the video signal from
Camera group 3 and display it on video tile 2 of Monitor 1.
Note: If you enter 0 + MON in live view mode, multiview mode is not supported
as video is then displayed on the keypad.