Setting a shadow tour – Interlogix TVK-800 User Manual
Page 70
68
TVK-800 User Manual
Setting a shadow tour
A shadow tour is a camera path that was manually-controlled. It has a beginning and
end. You can set a camera to move between two points such as two locations in a car
park. Only one shadow tour can be set up.
The PTZ dome camera must be able to support shadow tours.
There are two ways to set a shadow tour:
Method 1: To set a shadow tour using an output channel
1. Press the
Num
+
MON
keys and select the monitor.
2. Press the
Num
+
WIN
keys and select the video tile.
3. Press the
SET
key to enter the Settings window.
4. Press the
Num
+
PATTERN
keys and set the shadow tour number.
5. Using the joystick, move the PTZ camera through the desired positions.
6. Press the
SET
key again to complete the shadow tour.
Method 2: To set a shadow tour using an input channel
1. Press the
Num
+
CAM
keys and select the camera.
2. Press the
SET
key to enter the Settings window.
3. Press the
Num
+
PATTERN
keys and set the shadow tour number.