Interlogix TVK-800 - Manual (Page 57)

TVK-800 User Manual 55
Note: Window (WIN), camera group (CAM-G), multiview (MULT), and camera
tour (TOUR) functions are not available in local mode.
3. Press ESC to enter full-screen mode.
Display decoded video on a monitor
This section describes how to display video on a monitor when using a decoder.
Multiview display
Depending on the decoder used, you can display the video on the selected monitor in
full-screen mode as well as in 2X2 multiview format.
When in multiview mode, you can easily switch a selected video tile to full-screen mode
and back again as well as turn audio on and off. See Figure 18 below.
Figure 18: Multiview control icons
Switch the selected
camera in multiview
format to full-screen
mode Switch full-screen mode
back to the selected
camera in multiview
format Audio off Audio on
To view in full-screen or multiview mode:
1. Press the Num + MON keys to select the monitor.
2. Press the Num + MULT keys to select the multiview mode for the monitor.