Interlogix TVK-800 - Manual (Page 52)

50 TVK-800 User Manual
Set up a camera group
1. In the Main menu, click Input . The “Input Settings-Input” window appears.
2. Click the Input Group button. The “Input Settings-Input Group” window appears.
3. Select the desired group number from the Group No. drop-down list.
Up to 16 camera groups can be added.
4. Click the Add Camera button. The “Input Settings-Add Camera” window appears.
5. Select the desired cameras that you want to group together. Click Add .
6. Click Finish to return to the Input Group window. The list of cameras successfully
added to the group is shown.
Output settings
Use this menu to configure outputs such as monitors, decoders, DVRs, and NVRs.
You can display in the “Output Settings” window all the output channels that are
accessible by the user currently logged in.
You can also playback files from the output channel, such as a DVR or NVR.
For instructions on setting up outputs, see “Output settings” on page 38.
Macro settings
A macro is a sequence of steps or commands. When you run a macro, the steps
programmed into the macro are performed. You can add up to 128 macro commands.
There can be up to a maximum of six numbers in a macro command.
For instructions on setting up and using macros, see “Macro settings” on page 40