Interlogix TVK-800 - Manual (Page 60)

58 TVK-800 User Manual
Set up a camera group to display on a monitor group
You can configure the keypad to display the images from a camera group on a group of
monitors through a decoder.
When the number of cameras in a group is less than or equal to the number of video
tiles on-screen (for example eight cameras and nine video tiles), each camera is then
displayed on its corresponding time (for example, camera 1 on video tile 1, camera 2 on
video tile 2…)
When the number of cameras in a group is more than the number of video tiles on-
screen (for example 16 cameras and 4 video tiles), the cameras are displayed in the
following sequence mode: cameras 1 to 4 are displayed on video tiles 1 to 4, next
cameras 5 to 8 on video tiles 1 to 4, cameras 9 and 12 are displayed on video tiles 1 to
4, and finally cameras 13 to 16 on video tiles 1 to 4.
Note: The default dwell time is 30 seconds.
An error message will appear in the Hint box of the shortcut screen when an invalid
action is entered.
To view a camera group on a monitor group:
1. Press the Num + MON-G keys to select the monitor group.
2. Press the Num + CAM-G keys to select the camera group to be decoded and
displayed on the monitor group.
Note: In monitor group mode, output channels are only displayed in full-screen
mode by default.
Set up a tour
A tour is the display of images from a sequence of different cameras. You can set up to
64 cameras in a tour.
The dwell time is the time a camera image remains on-screen before the image from
the next camera is displayed. The default dwell time is 30 seconds but it can be
modified.
Tour setups are not saved when the device is restarted.
An error message will appear in the Hint box of the shortcut screen when an invalid
action is entered.