Interlogix TVK-800 - Manual (Page 66)

64 TVK-800 User Manual
Operating PTZ cameras
You can control PTZ dome cameras using the keypad. If the camera supports PTZ
functions, you can use the joystick as well as the Focus, Iris, and Zoom keys on the
keypad to control the camera.
Setting a preset
Presets are previously defined locations of a PTZ dome camera. They allow you to
quickly move the camera to a desired position.
An error message will appear in the Hint box of the shortcut screen when an invalid
action is entered.
There are two ways to set a preset:
Method 1: To set a preset using an output channel
1. Press the Num + MON keys and select the monitor.
2. Press the Num + WIN keys and select the video tile.
3. Using the joystick, move the PTZ camera to the desired position.
4. Press the Num + PRESET keys and enter the preset number to set the current
position as a preset.
Method 2: To set a preset using an input channel
1. Press the Num + CAM keys and select the camera.
Note: The action 0 + CAM is invalid.
2. Using the joystick, move the PTZ camera to the desired position.
3. Press the Num + WIN keys and enter the preset number to set the current
position as a preset.