Interlogix Concord 4 User Manual - Manual (Page 18)

16 Concord 4 User Manual
Auto stay arming
The auto stay arming feature helps cut down on false alarms in the event that
you arm the system to Level 3, but fail to leave during the exit delay time. With
auto stay arming, the system detects that no one opened and closed a delay
door within the delay time. It assumes that someone is still inside and arms to
Level 2 to prevent a false alarm.
Exit extension arming
The exit extension arming feature helps cut down on false alarms in the event
that you arm the system and exit the premises, but reenter before the exit delay
expires.
• Exit extension arming on. The system detects that a delay door opened
twice within the delay time. It assumes that you reentered the premises, and it
restarts the exit delay, giving you additional time to exit again.
• Exit extension arming off. The exit delay continues to count down, even if a
delay door is opened a second time.
Note: If the exit extension-arming feature is on, the exit delay will be restarted
only once.
Silent arming
Use the silent arming feature to arm your system without disturbing people
throughout the house with arming status beeps. Pressing 5 – Silent before
arming silences arming status and exit beeps from touchpads and interior sirens,
only for the current arming period.
Note: If the quick arm feature is on, an access code is not required. See “Quick
arm” on page 13 for more information.
To arm your system silently:
1. From any touchpad, press 5.
2. Within 4 seconds, press 2, code to arm to Level 2, or press 3, code to arm to
Level 3.
Note: Exit delay is doubled when arming silently.
Bypassing
It is possible to arm your system while leaving a door or window open. This is
useful if, for example, you like to sleep with a window open. If the door or window