Interlogix Concord 4 User Manual - Manual (Page 80)

78 Concord 4 User Manual
Doors and delay time settings
When the system is armed, enter and exit the premises only through designated
delay doors.
• Entry delay time. The time allowed to enter the premises and disarm the
system.
• Exit delay time. The time allowed to leave the premises after arming the
system.
Table 18 below indicates the door and delay time settings.
Table 18: Door and delay time settings
Door number Door location Partition Entry delay Exit delay
1 1
2 2
3 3
4 4
5 5
6 6
System features
Table 19 below shows system feature options
Table 19: System features
Feature My system features
Quick arm  Yes. Press the arming level desired.
 No. Enter arming level, then access code.
Quick exit  Yes. Press D and exit your armed premises through a
delay door within 2 minutes.
 No. I need to disarm my system in order to exit the
premises.
Exit extension  Yes. If I reenter the armed premises during the exit
delay time, the panel will restart the exit delay time.
 No. If I reenter the armed premises during the exit delay
time, it will continue to count down and I must disarm
the system.