Interlogix Concord 4 User Manual - Manual (Page 24)

22 Concord 4 User Manual
To send an auxiliary panic alarm from a keychain touchpad, press and hold the
Lights and Star buttons together for 2 seconds. If your system includes controlled
lighting, all system lights turn on and remain on during an auxiliary panic alarm.
Siren time-out
If the system is not disarmed after an alarm, the sirens will continue to sound
until the time-out period is reached (the alarm will still be in progress until the
system is manually disarmed). The time-out period can only be programmed by
your installer or dealer.
Access codes
The system requires a valid access code before it will process most commands.
One system master code serves as the primary user programming code for your
system. Only a very limited number of users will need to know this code.
Concord 4 systems have six partition master codes (one for each partition) that
allow access to system operations in their respective partitions. Concord Express
V4 systems are single-partition systems with no partition master codes.
Note: Partitions are individual security systems within the same control panel.
Partitioned systems are typically used for large buildings with several entry/exit
points and different access/operating hours. They also work well for small strip
malls, duplexes, and quad-homes where one control panel can provide individual
security for six different tenants.
Concord 4 systems have 230 regular user codes (000 to 229), while Concord
Express V4 systems have 16 regular user codes (00 to 15). These codes act like
keys to arm and disarm the system. If necessary, they can be assigned to
neighbors, baby-sitters, or repairpersons for temporary use. Regular user codes
can be changed in user programming and are easily deleted from the system
when no longer necessary.
Programming access codes
The code you use to enter user programming determines which features such as
codes and code attributes you’ll be able to change. A user code can be given
certain attributes that limit what the user can do within the system. Attributes may
be changed by you or by a dealer over the phone using downloading software.
See “User codes” on page 72 to record the actual user codes and the attributes
of each. If you need assistance in changing code attributes, contact your dealer.