Interlogix Concord 4 User Manual - Manual (Page 44)

42 Concord 4 User Manual
station. The central monitoring station will respond in accordance to the
guidelines set forth in your monitoring agreement.
See “No activity time” on page 79 to see if the no activity feature is currently
available to you and the duration of the no activity setting. If the feature is not
currently available and you wish to have it, contact your dealer.
Panel download
Downloading is done only by your dealer using software specifically designed for
this system. It allows the dealer to change programming without sending a
service person to the site.
Turning the download feature on gives the dealer remote access to your system
in order to:
• Update your account.
• Back up data from your system.
• Quickly implement programming changes.
Note: Before allowing any download sessions, the system must be disarmed to
Level 1 (off).
To enable/disable the panel download setting:
1. Enter the programming menus by pressing 9, system or partition master
code.
2. Press 041.
3. To turn downloading on, press 2, #. The dealer will be able to access your
system remotely if necessary. To turn downloading off, press 1, #. The dealer
will not be able to access your system remotely.
4. Press *, 00, # to exit the programming menus.
Partitioned system (Concord 4 systems only)
Concord 4 systems can be set up by your installer to operate as a multiple-
partitioned system. Partitioned systems provide security for up to six individual
customers or areas of a building from a single control panel. Partitioned systems
are useful in strip malls or multi-family housing.
Global settings
Global system settings affect all partitions. Most are set by the installer. Global
settings that are programmed by the user include:
• Time and date
• System master code