Interlogix XL LCD Keypad Plus User Guide - Manual (Page 17)

21-3600E rev1.3 Welcome Alarm Status Admin Reference 9
Suspending Schedules for an
Area or Areas
A schedule can be blocked altogether if you do
not want a scheduled closing to occur.
Steps:
1. Enter your user
ID and/or PIN to
log into the
keypad.
2. Press the ► keys
until you see
"Schedule". Then
press the key under "Schedule" to select it.
3. Select Schd to
suspend the
Schedule for the
selected area (e.g. Office) or select Next
Area
to select a different area.
4. Select Susp to
suspend the
Schedule for the
selected area.
5. Select Ok to
suspend the
schedule and
return to the main screen. Select Resume to
reinstate the schedule.
To return to the main screen (log out), press
the “ “ escape key a few times, or let the
system time-out (1 minute).
WARNING: A Schedule will remain
suspended indefinitely until “Resume” is
selected .
Turning Protection ON, STAY, or
Viewing the Present Arming-Level
With the appropriate authority, you can arm
and disarm the system, or specific area(s)
using an LCD keypad.
Steps:
1. Enter your user ID
and/or PIN to log
into the keypad.
2. Select the button
for your desired
protection level.
If all areas are currently OFF, only STAY and ON are
shown. If STAY is not an authorized function, only
ON will be shown.
The "Stay" arming-level refers to the perimeter
sensors being monitored, but not the interior ones.
This is typically used when someone is inside the
facility or protected area.
3. Select No to
choose an Area to
view or change (or
Yes
for all areas ON).
4.
Press the left
button
to set the
arming-level.
Select Nxt to choose a different area, or
select Done to exit.
5. Select OK to
confirm. (Review
allows you to
change your mind.)
6. If points are currently bypassed, in tamper,
in alarm, or not Ok, the following screen will
appear when you are attempting to arm an
area (to Stay or ON).
7. Select Ok? to arm
the system, or
View
to list points
that are currently not Ok.
WARNING: Selecting OK will arm the
system with point(s) not secure.
Welcome
Enter ID: _ _ _
Menu Options
◄ Schdule ► ↓Ok
Area..........Off
↓Schd ↓Next Area
Close by 17:30pMo
↓Worklate Susp↓
Suspended
↓Ok Resume↓
Welcome
Enter ID: _ _ _
Push ► for menus
↓Stay ↓On
All Areas ON?
↓Yes ↓No
AreaName .....Off
↓On ↓Nxt Done↓
Area(s) to....ON
↓OK ↓Review
Pts in Bypass!
↓Ok? ↓View