Interlogix XL LCD Keypad Plus User Guide - Manual (Page 30)

22 xL LCD Keypad User's Guide 21-3600E rev1.3
Changing Your Own PIN
The person who is logged in can change their
PIN number at any time.
Steps:
1. Enter your user
ID and/or PIN to
log into the
keypad.
2. Press ► to scroll
to the PIN option.
3. Select My PIN to
change your PIN.
Press Ok
4. Enter your new 4-
digit or 5-digit
PIN.
TIP: You can use the letters on the keypad to 'spell'
a word as a reminder of your PIN.
Re-enter the new PIN a second time when
prompted for this (this helps to protect against
typing errors).
Note: The last two digits of the PIN can not be
identical. Do not use consecutive numbers such as
1234. For security reasons, duplicate PINs are not
allowed on systems with a PIN only user code. If the
message “PIN not allowed” appears, select a
different PIN.
The “PIN changed”
screen displays and
then returns to the
system standby screen.
Adding a User to the System
New users can be added to the system as
needed.
A User is a person who can use system keypads,
and/or gain entry at access-controlled doors.
Steps:
1. Log into the
keypad by
entering your
user ID and/or PIN as indicated on-screen.
2. Press ► until
"Users" appears,
& press Ok.
3. Enter an available
user number (and
select Ok), or
select Ok, and then press ► until a user
number appears with "Add" (instead of Edit
and Delete).
4. Undfnd
(Undefined)
Select Add.
? : In this screen, "?" refers to systems with Suite
Security keypads (allows viewing the user’s Suite
related abilities for the selected user number). Note:
Suite Security assignments for a user are set up
through the Director software.
Refer to the details that follow while working with
any of the listed topics:
Aut: Use the Next
and Prev(ious)
buttons to select an
authority profile for the user. (Select Ok when
finished).
This determines what doors the user can enter (and
at what time of day), and the tasks they will be able
to perform at system keypads. This selection cannot
be Undfnd (Undefined).
Consult your Security Representative / Installer to
make changes to the authority levels.
Welcome
Enter ID: _ _ _
Push ► for menus
↓Stay ↓On
Menu Options
◄ My Pin ► ↓Ok
New PIN _ _ _ _
For User: UID#
PIN Changed
Welcome
Enter ID: _ _ _
Menu Options
◄ Users ► ↓Ok
0xx
↓OK Select User
0xx ► Undfnd
↓Add
0xx AuthProfile
↓Ok ↓Next ↓Prev