Interlogix XL LCD Keypad Plus User Guide - Manual (Page 19)

21-3600E rev1.3 Welcome Alarm Status Admin Reference 11
Area Priority Protection On/Off
Priority Arming requires that areas are armed
and disarmed in order of their priority. If
protection for Area 1 is turned on first, then
area 2 and then 3, disarming the areas would
then require area 3 to be turned off first, then
area 2 and then 1. This sequence can vary
and it is necessary to learn the order from your
Security Representative / Installer or System
Administrator.
• If protection for
areas is not turned
on, off in their
proper sequence, this error screen will appear
and the process will not occur. It will have to be
repeated properly.
Common Area Protection On/Off
A common entrance used by e.g. a user who
has authority for only certain areas in a
multiple area system, must be able to enter the
entrance to reach their areas. At the same
time, a user who only has authority for their
particular areas beyond the same entrance
must also be able to enter. This can make this
main entrance a “common area”. Both users
can have authority for this common area to
reach their particular areas. This allows them
to be able to turn the protection on and off to
this common area when their authorized areas
are in use. Check with your Security
Representative / Installer
or System
Administrator for information and authority for
a Common Area.
Turning ON an Area’s Protection
using an Access TOKEN
Check with your
Security
Representative /
Installer to have this
feature added to your
system. You must have
the proper Authority to
control additional
protected areas.
1. Place and hold
the token in
front of the
keypad within 2 -3 inches (78mm).
2. The exit delay
will start and the
keypad will
sound its exit delay beeps.
Turning OFF an Area’s Protection
using an Access TOKEN
1. If you have entered the area with protection
on, the keypad
will beep and
the screen will
display:
2. Repeat holding the token in front of the
keypad within 2 -3 inches (78mm).
3. The screen will
display:
Protection will be off.
AREA 1
Priority Fail
Welcome
Enter ID: _ _ _
Arming...
↓Next Function
To Disarm
Enter ID: _ _ _
Disarming...
↓Next Function