Interlogix XL LCD Keypad Plus User Guide - Manual (Page 24)

16 xL LCD Keypad User's Guide 21-3600E rev1.3
Status and Control Features
NOTE: Status will display certain options e.g.
“Comms, Modem, Licns” that will not appear
familiar because they are not covered in this
publication. These options should be ignored
by the end user because they are for a
technician’s use only.
Using an LCD keypad, you can:
• Check the status of various items in the system
and view the present arming-level of desired
area(s).
• Bypass faulty sensors to allow arming the
system and/or specific area(s);
• Command doors to Unlock, relock, or change
operating characteristics;
• Use the function keys to perform pre-
programmed signalling and/or switching
functions.
Using the Function Keys
LCD keypads provide 10 function keys that
can perform various signalling and/or switching
functions. Consult with your security
representative / installer to learn what the
ones you may have ordered do.
To use function key 1, 2, 3, 4, or 5, simply
press and hold the “F” key, and press the
desired number at the same time.
1
,
- # 2 ABC 3 DEF
4 5 JKL 6 MNO GHI
7 8 TUV 9 WXY PRS
0 Z_Q
X
X
For function keys 6, 7, 8, 9, and 0, a user with
function-key authority may need to enter their
ID/PIN numbers to be allowed to use these
function keys.
This requirement can be assigned as necessary to
any areas. Check with your security representative.
To log in, open the
keypad cover, and
key in your user ID
number and/or PIN
number as indicated
on the display.
Then press and hold the “F” key, and press the
desired number at the same time.
Checking the System Status
(monitored conditions for a system
control unit)
The system status feature shows the status of
all conditions such as (tamper, low battery,
etc.) that are being monitored for the control
unit associated with your keypad.
These items may also be referred to as "Equipment"
conditions.
Steps:
1. Enter your user ID
and/or PIN to log
into the keypad.
2. Select ► to
access other
functions.
3. Use the ◄ and ►
arrow buttons to
scan through the
listed items. When ”Status" appears, press
Ok.
4. Use the ◄ and ►
arrow buttons to
scan through the
listed items and press Ok.
To return to the main screen (log out), press the
“ “ escape key a few times, or let the system
time-out (1 minute).
For details on the possible status messages, refer to
"Error Messages and Trouble Indications" in the
reference section near the back of this guide.
Welcome
Enter ID: _ _ _
Your Name Appears
Enter PIN: _ _ _ _
Welcome
Enter ID: _ _ _
Push ► for menus
↓Stay ↓On
Menu Options
◄ Status ► ↓Ok
Status Options
◄ System ► ↓Ok