Interlogix XL LCD Keypad Plus User Guide - Manual (Page 32)

24 xL LCD Keypad User's Guide 21-3600E rev1.3
System / Suite
(Condo):
For
systems with
Suite Security
keypads, this screen
allows accessing the
System
authority screen (same as the
previous Aut “Authority”) or, the Suite
Security
(Condo) authority screen.
Tip: Press the “ “ escape key if you do not want to
use this screen.
Use the Next and Prev buttons to select a
Suite Security authority profile for the user.
(Select Ok when finished).
Suite Authority of "Undfnd": This is a reserved
suite user (that can be edited by a user with Suite
"Master" authority).
Suite Security Authority assignments for a user are
set up through the Director software.
More:
Provides access to additional screens.
Name: Use the
keypad to enter the
user's name, and
select Ok when finished.
Tip: Check the letters on the numeric keypad.
Then, for each letter of the name, press the specific
key until the letter appears (e.g., pressing 2 makes a
2, A, B, C; 0 provides 0, Z, _ <space>, Q, etc).
To move to the next letter-position, use the
► right
arrow button, or wait 2 seconds. To retype a
previous letter, use the
◄ ► left or right arrow keys,
and then enter the letter as before.
Card:
Enter the card
version number (if
applicable), and the
access-card/token number for this user, and
select Ok when finished.
If card-access (entry at controlled doors) does not
apply, leave the card number as "000000000".
Card Version number support is supplied by your
Security Representative.
Firmware revisions needed for 9-digit card IDs, or
cards with version numbers: Panel firmware
≥
V3.2 ,
and door/elevator controller firmware ≥
V1.5 .
PIN: This allows
setting or changing
the
P
ersonal
I
D
N umber for this user. (You'll be asked to enter
it twice--to help protect against typing errors.)
The last two digits of the PIN must be different. Also,
do not use consecutive numbers like 1234.
Lang / Chal: This
screen allows setting
the LCD language for
this user, and whether or not the "physically-
challenged" unlock times and door-held-open
times apply to this user.
Select Lang to 'toggle' the language, or Chal
to 'toggle' the "Challenged" setting. When
finished, select Ok.
Watch the screen for the settings to change.
(You will remain in this same screen.)
Lng:Eng means Language is English
C:N means Challanged? – No.
To return to the main screen (log out), press the
“ “ escape key a few times, or let the system
time-out (1 minute).
Viewing or Changing Settings for
a User
For an existing user, you can view or edit their
settings as desired.
A User is a person who can use system keypads,
and/or gain entry at access-controlled doors.
Steps:
1. Log into the
keypad by
entering your
user ID and/or PIN as indicated on-screen.
2. Press ► until
"Users" appears,
& press Ok.
3. Enter the specific
user number
(and select Ok),
or
select Ok first, and then press ► until the
desired user appears on-screen.
0xx UserName
↓System ↓Condo
0xx AuthProfile
↓Ok ↓Next ↓Prev
. . . .
↓OK
0xx UserName
↓OK vv_nnnnnnnnn
New PIN - - - -
For User 0xx
0xx..Lng:Eng.C:N
↓OK ↓Lang ↓Chal
Welcome
Enter ID: _ _ _
Menu Options
◄ Users ► ↓Ok
0xx Select User
↓OK