Changing the printed history language, Printing the history log – Interlogix XL LCD Keypad Plus User Guide User Manual
Page 36
28
xL LCD Keypad User's Guide
21-3600E rev1.3
Printing the History Log
If your system includes a printer-capable
module, you can print the history log. (This will
be sorted by date).
Steps:
1.
Ensure the printer is turned on, and has
paper loaded.
2.
Enter your user
ID and/or PIN to
log into the
keypad.
3.
Use the ◄ ► left
and right arrow
buttons to scroll
the items until History appears and press
Ok.
4.
When Category
appears, press
Ok.
5.
Select App
(Application
Module) to
access the module with printer functions.
6.
Select SMA or
HSC
which are
other related
equipment selections for use by a technician
only. However, they will both permit access
to the Printer selection.
7.
Select Printer to
access the printer
menu.
Choose from the
following selections:
• Start: Enables the
printer (if required).
• Pause / Resume: Pauses or resumes a printout;
• Cnc: Cancels a printout. Tip: You may also need
to turn the printer off to clear its memory.
• Plog: Prints the entire history log.
To return to the main screen (log out), press
the “ “ escape key a few times, or let the
system time-out (1 minute).
Changing the Printed History
Language
You can change the language for the printed
history log when needed.
Check with you Security Representative / Installer to
confirm your system version is capable of this
feature.
Steps:
Follow steps 1 to 6 from the previous “Printing
the History Log”
7.
At step 7, select
Lang
to change
the printing
language for this application module.
The present printed language will be indicated on the
first line next to "Lang:”.
8.
Select Change to
change the
language. Press
Ok
when completed.
To return to the main screen (log out), press
the “ “ escape key a few times, or let the
system time-out (1 minute).
Welcome
Enter ID: _ _ _
Menu Options
◄ History ► ↓Ok
View History of:
◄ Category ► ↓Ok
View History of:
↓Area ↓Condo ↓App
Menu Option
↓SMA ↓HSC
Select Option...
↓Printer ↓Lang
Printer On-Line
↓Pause ↓Cnc ↓Plog
Select Option...
↓Printer ↓Lang
Lang: Language
↓Ok ↓Change