Keri Systems Doors.NET Manual - Manual (Page 138)

Doors.NET Reference Manual
- 138 -
2. Change the Image Type by choosing from the list.
Note: These options will differ depending on the product you have purchased.
3. Optionally select Print image exactly as-is to prevent changes to an image so that it
prints correctly. Use this feature for bitmaps that contain digital watermarks which
may be lost if the bitmap is resized.
Note: When you select Print image exactly as-is, other properties for the image are dis-
abled, such as line color and thickness, shadow, close cropping, fading transparency,
and gray scale. However, the checkbox Don’t clip image becomes enabled, allowing
you to print the entire image even if it is too large to fit in its rectangle as defined on the
layout.
4. If applicable, select the data source field that points to the image.
Select a Sample Image