Keri Systems Doors.NET Manual - Manual (Page 73)

Doors.NET Reference Manual
- 73 -
License Manager
The License Manager activates your software allowing use.
Retrieve the License Key
A license key is provided with the software DVD case, but this key is only valid for new
NXT controller installations. For PXL and Mercury Powered NXT controller installations
you must get a license key from Keri Inside Sales. Further, there are extended, optional
features that may require a license key update. This applies to all controller types.
NXT License Key
The NXT license key is typically retrieved from the software DVD case.
PXL License Key
A PXL license key must be obtained from Keri Inside Sales. The PXL license key sup-
ports two types of PXL controllers:
l
Standard – supported immediately with no restriction on the number of controllers
l
Legacy – limited to a licensed number of controllers
Before contacting Keri Inside Sales for a license key, you need to know the number of
Legacy PXL controllers you have.
Identifying Standard versus Legacy PXL Controllers
The PXL controller’s model number label identifies if the controller is Standard or
Legacy (refer to the figure below). Standard controllers work directly with Doors.NET
using a standard license. There is no controller limit when using Standard controllers.
Legacy PXL Controllers
Legacy controllers require a PXL Legacy Count to be set on the license key to enable
the controllers to work with Doors.NET. By default this value is set to zero. Typically