Keri Systems Doors.NET Manual - Manual (Page 329)

Doors.NET Reference Manual
- 329 -
Setup Inputs
The Setup Inputs process allows you to configure the input type, circuit supervision, and
monitoring parameters.
Under the Hardware Setup tab, Click the Inputs tab. The Selected Hardware tab is then
loaded on the
ribbon .
Display Input Information by Column
The left pane of the grid lists all recognized Inputs in alphabetical order, prioritized by
column. Drag column headers above the header field to filter and display information per
your specific needs and priorities. Select a input listed in the left pane and all its con-
figuration parameters are displayed in the right pane.
Information displayed in sortable columns:
l
Gateway - the gateway type/name for the controller to which the input is connected
l
Controller - the name assigned to the controller