Keri Systems Doors.NET Manual - Manual (Page 144)

Doors.NET Reference Manual
- 144 -
It is important to know that your Photo ID license will need to be ‘revoked’ if you wish to
move your Doors.NET badging installation onto a different PC, or if for some reason you
wish to format the Doors.NET host PC’s hard-drive.
Once revoked, you can then re-activate the license.
Revoke Procedure
1. From the Start Menu, go to All Programs >> EPI-Builder Run-Time 6 >> Activate
EPI Builder Runtime License.
2. Click About and a window will appear. Make a note of the EPI Builder license that
appears at the bottom of the window. It will begin with IW EB RF N. Then click the
OK button.
3. Click Tools >> Revoke License then click OK to the warning that you are about to
revoke your license.
4. Choose the default option of revoking the license via Internet (Recommended).
However, it is important that there are no Internet firewall filters that could be
restricting your connection. If you do have a highly restrictive firewall then it would
be best to select the second option of revoking the license over the phone.
5. You will see one more confirmation screen stating that you are about to revoke
your license over the Internet. Click the OK button to proceed.
6. After a few seconds you should see a message appear stating the revoke was suc-
cessful.