Keri Systems Doors.NET Manual - Manual (Page 317)

Doors.NET Reference Manual
- 317 -
Setup Tasks
The Setup Tab provides access to the most commonly used tasks for hardware setup
and manual/override operation, setting operator permissions, and basic system dia-
gnostics.
Hardware Tasks
Hardware tasks allow you to setup and configure all system hardware, and then to manu-
ally operate doors, inputs, and outputs (overriding the current hardware state).
Hardware Setup - hardware setup, configuration, and manual operation
Synchronize Clocks - synchronize all controller clocks to match the PC system clock
Permissions Tasks
Permissions Tasks allow you to create and assign operators to groups which allow or
deny operators the permission to perform the various program tasks and to view program
information.
Operator Permissions - create Operator Groups; assign task permissions, gateway
access, and access group access; and set audit permissions
Application Permissions - assign high level task permissions and application access,
and assign manual/override hardware operation access
Diagnostics Tasks
Diagnostic Tasks allow you to view basic system information on either all connected cli-
ents or on basic program and system information
System Tasks
System Options allow you to view detailed system configuration and licensing inform-
ation, including information for optional applications