Keri Systems Doors.NET Manual - Manual (Page 307)

Doors.NET Reference Manual
- 307 -
Click the Yes Button. Once saved, the date is highlighted in bold text on the calendar.
5. Under Properties:
l
Enter the description of the holiday, up to 50 characters.
l
Select the Holiday Type (1 through 8) from the pull-down list. The Hol-
iday Type drop down selection is a list of eight holiday types. Holiday
types are used to categorize holidays into different groups and allow dif-
ferent weekly schedules intervals to be active on those groups. For
example, you may define a Holiday Type 1 as a mandatory company
holiday and a Holiday Type 2 as an optional company holiday. By com-
bining the holiday types with the weekly schedule intervals, you can
automatically deactivate all access groups on any holiday that is type 1
and selectively enable certain cardholder access on any holiday that is
a type 2.
l
Click in the Enabled tick-box to activate the holiday.
l
If desired, you can set the holiday to be a Special Event. This selection
means it will not affect other schedules using the same holiday type.
For example; If you set the holiday as a Special Event and set it to Type
1 it will not have any effect on time schedules that have Type 1 hol-
idays enabled or disabled. The Special Event option is not supported
by PXL and NXT hardware.