Keri Systems Doors.NET Manual - Manual (Page 550)

Doors.NET Reference Manual
- 550 -
Trigger Setup
1. Click on the Triggers tab next. The same controller should already be pre-selected
in the controller list, so click the Add Trigger button and then highlight the new trig-
ger.
2. The trigger will also come from the same 4x4 module - one of the available inputs
is named 'Motion trigger'. There are 2 procedures that need to be defined and 2 trig-
gers.
3. The first trigger will activate the buzzer output when it goes active. The second trig-
ger will deactivate the buzzer when the input goes secure.