Canon 2010F - Manual (Page 11)

Overview of the imageRUNNER 2010F 1-2
Introduction to Cop
ying
1
Overview of the imageRUNNER 2010F
Most operations of this machine are done from the control panel, Copy Basic
Features screen, Special Features screen, and Additional Functions menu. To use
the copy function of this machine, press the appropriate keys on the control panel in
accordance with the selections on the LCD display.
This section provides an overview of the main features of this machine.
■
Copy Basic Features Screen
The screen below, which appears when the machine is ready to make copies, is called the
Copy Basic Features screen. You can set the following basic copy features from this
screen:
• Select the paper size automatically, or specify the paper size manually for a copy job.
(See “Paper Selection,” on p. 2-4.)
• Adjust the copy exposure and image quality automatically or manually. (See “Copy
Exposure and Image Quality Adjustments,” on p. 2-8.)
• Adjust the copy ratio automatically or manually. (See “Changing the Copy (Zoom) Ratio,”
on p. 2-13.)
• Collate or staple copies in page order. (See “Collating Copies,” on p. 2-18.)
• Scan another original while the machine is printing a previous job. (See “Reserved
Copying,” on p. 1-18.)
• Interrupt a reserved or current job in order to make higher priority copies. (See “Interrupt
Mode,” on p. 1-20.)
■
Special Features Screen
The screen below, which appears when you press [Special Features] on the control panel,
is called the Special Features screen. You can set the following copy modes from this
screen: