Canon 2010F - Manual (Page 37)

Paper Selection 2-6
Basic Cop
ying F
eatures
2
1
Press [COPY].
lights.
2
Place your original
➞ press [F2] (PAPER SELECT).
NOTE
• The default setting is ‘AUTO PAPER’.
• If DRAWER ELIGIBLTY is set to ‘01 OFF’ in Common Settings (from the Additional
Functions menu), <AUTO PAPER> is not displayed. (See Chapter 4, “Selecting
and Storing Settings,” in the Reference Guide.)
3
Press [F3] (
▼) or [F4] (▲) to select the desired paper size.
NOTE
• The paper sizes shown on the LCD display vary depending on which paper sizes
are loaded in the paper drawers.
• indicates that the paper is set vertically, and indicates that the paper is set
horizontally.
• To select the stack bypass for the current job or for a reserved job, press
(STACK BYPASS).
● If you want to use the stack bypass:
❑
Load the desired paper size and type in the stack bypass.
The Paper Size setting menu appears.
COPY
COPY
F2
F3
F4
F2