Press [start, Special cop ying f eatures – Canon 2010F User Manual
Page 68
Frame Erase
3-13
Special Cop
ying F
eatures
3
6
Press [F3] (–) or [F4] (+) to set the desired book frame erase
width (3 mm to 50 mm) for the center line
➞ press [OK].
You can also use the numeric keys to enter the book frame erase width, and
(Clear) to clear the value.
If you enter a value outside the setting range, an error tone sounds. Enter a value
within the setting range.
The selected mode is set, and the Copy Basic Features screen appears.
NOTE
The default setting is ‘10 mm’.
7
Enter the desired copy quantity (1 to 99) using the numeric
keys.
For details about entering the copy quantity, see “Specifying the Required
Number of Copies,” on p. 2-2.
8
Press [Start].
Copying starts.
NOTE
•
If you want to cancel this mode, press
(Stop)
➞ the cancel job display appears
➞ press
(YES) or
(NO).
•
If you press
(Stop) after copying has started, some blank sheets of paper may
print out.
•
To cancel all settings and restore the machine’s standard settings, press
(Reset).
•
Set the frame erase width around the original using the COPY SETTINGS menu in
the Additional Functions menu. You can set from 1 mm to 20 mm. (See “Frame
Erase Width,” on p. 4-7.)
F3
F4
OK
C
1
2
3
4
5
6
7
8
9
@.
GHI
PRS
ABC
JKL
TUV
DEF
MNO
WXY
OPER
SYMBOLS
Start
F3
F4