Canon 2010F - Manual (Page 92)

Changing the Current Standard Settings 4-13
Customizing Settings
4
Prescan
When you press [Start] in a regular scanning operation, the machine goes through
a warming-up process each time before it actually starts scanning the document.
The Prescan mode function keeps the machine warmed up so it starts scanning as
soon as you press [Start], thereby shortening the scanning time.
NOTE
• If PRESCAN is set to ‘01 ON’, the machine gets ready to start copying from the moment
you place your original in the feeder or on the platen glass.
• The default setting is ‘01 ON’.
1
Press [Additional Functions]
➞ press [F3] (▼) or [F4] (▲) to
highlight <02 COPY SETTINGS>
➞ press [OK].
The COPY SETTINGS menu appears.
2
Press [F3] (
▼) or [F4] (▲) to highlight <09 PRESCAN> ➞ press
[OK].
Each time you press (
▼) or
(
▲), the next or previous menu option
becomes highlighted.
The PRESCAN menu appears.
3
Press [F3] (
▼) or [F4] (▲) to select <01 ON> or <02 OFF> ➞
press [OK].
If you want to use the prescan function, select <01 ON>.
If you do not want to use the prescan function, select <02 OFF>.
Additional Functions
F3
F4
OK
F3
F4
OK
F3 F4
F3
F4
OK