Canon 2010F - Manual (Page 36)

Paper Selection 2-5
Basic Cop
ying F
eatures
2
1
Press [COPY].
lights.
2
Place your original
➞ press [F2] (PAPER SELECT).
3
Make sure that <AUTO PAPER> is selected
➞ press [OK].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
4
Press [Start].
Copying starts.
NOTE
If the message <LOAD THE APPROPRIATE SIZE PAPER> appears, the paper
loaded in the paper drawers is different from the original paper size. Load the
appropriate paper. If you press
(Start) without loading the correct paper size,
the machine automatically selects the smallest loaded paper size, and starts
copying.
Manual Paper Selection
You can make copies after manually selecting the paper size and type of paper
loaded in the paper drawers or stack bypass.
IMPORTANT
If paper is selected manually, you cannot use the Rotate print mode even if ROTATE
PRINT is set to ‘02 ON’ in the Common Settings menu. (See Chapter 4, “Selecting and
Storing Settings,” in the Reference Guide.)
NOTE
The paper sizes/types loaded in the paper drawers can be set from the Additional
Functions menu. (See Chapter 4, “Selecting and Storing Settings,” in the Reference
Guide.)
COPY
COPY
F2
OK
Start