Canon 2010F User Manual

Page 70

Advertising

Frame Erase

3-15

Special Cop

ying F

eatures

Press [F4] (ORIGNAL SIZE) to select the size of the original

➞

press [OK].

Each time you press

(ORIGNAL SIZE), the next or previous menu option

becomes highlighted.

The Frame Erase Width setting menu appears.

NOTE
• You can set the Hole Punch Erase mode only for the original sizes shown on the

LCD display.

•

The machine automatically selects the copy paper size according to the original
size you set. <AUTO PAPER> is displayed; however, you can also select the paper
size manually.

Press [F3] (–) or [F4] (+) to set the desired hole punch erase
width

(3 mm to 20 mm) ➞ press [OK].

You can also use the numeric keys to enter the hole punch erase width, and

(Clear) to clear the value.

If you enter a value outside the setting range, an error tone sounds. Enter a value
within the setting range.

The selected mode is set, and the Copy Basic Features screen appears.

NOTE

The default setting is ‘18 mm’.

Advertising