Canon 2010F - Manual (Page 82)

Changing the Current Standard Settings 4-3
Customizing Settings
4
Changing the Current Standard Settings
The standard settings refer to a combination of copy modes that the machine
automatically applies at power ON or when [Reset] is pressed. This section
explains the procedure for changing copy modes stored as standard settings.
NOTE
• The standard settings are applied when:
-
(Copy) is pressed to initiate the copy function
- (Stop) or (Reset) is pressed (except during copying)
- Auto Clear is initiated
- the operation from the Additional Functions menu is complete
• There are seven standard settings:
- Image Quality and Copy Exposure
- Zoom Ratio
- Copy Quantity
- Frame Erase Width
- Auto Sort
- Sort Rotate
- Sharpness
Image Quality and Copy Exposure
This setting enables you to set the standard copy image quality and exposure.
NOTE
The default settings are ‘TEXT’ for Image Quality and ‘5’ (center) for the Copy Exposure.
1
Press [Additional Functions].
The ADDITIONAL FUNCTIONS menu appears.
2
Press [F3] (
▼) or [F4] (▲) to highlight <02 COPY SETTINGS>
➞ press [OK].
Each time you press (
▼) or
(
▲), the next or previous menu option
becomes highlighted.
COPY
Additional Functions
F3
F4
OK
F3 F4